Chevrolet 5.3L 4L60 2WD transmission

Looking for a solid, reliable drivetrain combo for your project car, truck, or SUV? This is a complete GM Chevrolet 5.3L 4L60 2WD transmission, both pulled from a clean, well-maintained vehicle. Whether you’re working on a street rod, daily driver, restomod, or LS swap, this proven powertrain offers the perfect balance of power, durability, and affordability.

 Specifications:

• Engine: 5.3L Vortec V8 (LM7/LC9/L59 depending on availability)

• Transmission: 4L60-E 4-speed automatic (2WD)

• Drivetrain: Rear-Wheel Drive (RWD)

• Condition: Used, tested, and in good running condition

• Mileage: Varies (see details below)

• Fitment: 1999–2007 GM Trucks, SUVs, and great for LS swap projects

• Included: Engine, transmission, engine wiring harness, ECU/PCM, and accessories (based on package)

 Engine Details – GM 5.3L V8 (Vortec)

The Chevrolet 5.3L 4L60 2WD transmission is part of GM’s Generation III/IV small block LS engine family and has become one of the most popular choices for engine swaps and performance builds due to its balance of reliability, horsepower, and availability.

• Engine Code: Typically LM7, L59 (flex-fuel), or LC9 (aluminum block)

• Displacement: 5.3 liters / 325 cubic inches

• Horsepower: ~285–320 hp (stock)

• Torque: ~325–340 lb-ft

• Fuel System: Sequential Fuel Injection

• Compression Ratio: 9.5:1 to 9.9:1 (varies by engine variant)

• Block Material: Cast Iron (LM7, L59) or Aluminum (LC9)

• Heads: Aluminum cylinder heads

• Valvetrain: Overhead valve (OHV), 2 valves per cylinder, hydraulic roller lifters

• Fuel Type: Gasoline (E85 capable for L59/LC9 variants)

• Compatibility: Easily swappable into classic muscle cars, hot rods, Jeeps, and off-road rigs

• Tuning Potential: Supports bolt-ons, cam upgrades, turbos, and superchargers

These engines are known to run for 200,000+ miles with proper maintenance. The unit for sale has been tested, compression-checked, and was pulled from a running vehicle with no internal issues.

 Transmission Details – Chevrolet 5.3L 4L60 2WD transmission

The Chevrolet 5.3L 4L60 2WD transmission is a time-tested 4-speed automatic overdrive transmission used widely across GM’s light-duty trucks and SUVs. It pairs beautifully with the Chevrolet 5.3L 4L60 2WD transmission to offer a smooth and strong shifting experience, ideal for both cruising and towing.

• Transmission Code: 4L60-E (2WD version)

• Gears: 4-speed automatic with overdrive

• Gear Ratios:

  • 1st: 3.06

  • 2nd: 1.62

  • 3rd: 1.00

  • 4th (Overdrive): 0.70

  • Reverse: 2.29

• Torque Converter Included: Yes

• Bellhousing: Integrated (LS bolt pattern)

• Flexplate Included: Yes (in most packages)

• Shifter Compatibility: Column or floor shift setups

• Cooler Lines: Ports available

• Application: Great for 2WD GM trucks, muscle cars, swap builds, or as a replacement unit

This transmission was pulled from a working truck, shifts smoothly through all gears, and has been inspected for wear and leaks. It has no signs of slipping or delayed engagement.

 What’s Included:

Depending on the package or your specific needs, this engine and transmission set can include:

• Complete 5.3L engine (long block with heads and internals)

• Intake manifold and throttle body

• Fuel rails and injectors

• Coil packs and wiring harness

• Engine Control Unit (ECU/PCM)

• Mass Air Flow Sensor (MAF)

• 4L60-E transmission (2WD)

• Torque converter

• Flexplate/flywheel

• Starter (if applicable)

• Engine mounts (on request)

• Oil pan (truck-style pan; may need swapping for low-clearance swaps)

If you’re planning a swap, we can include the necessary engine harness and computer with the VATS (Vehicle Anti-Theft System) disabled for easy startup in a non-OEM vehicle.

 Vehicle Source Chevrolet 5.3L 4L60 2WD transmission

This drivetrain was professionally pulled from a 200X Chevrolet Silverado 1500 (exact year and VIN available on request). The vehicle had [0.00] miles on the odometer, ran and drove perfectly, and had no engine or transmission codes at the time of removal.

We are a trusted seller of used and refurbished GM powertrains, and all units are bench-tested before sale. Photos and videos of the engine running prior to removal can be provided upon request.

 Ideal Uses Chevrolet 5.3L 4L60 2WD transmission

This engine and transmission combo is a go-to choice for a wide range of applications:

• Classic Car LS Swaps – Perfect for C10s, Chevelles, Novas, G-Bodies, Impalas, Camaros, and more

• Off-Road Builds – Jeeps, Toyota Land Cruisers, rock crawlers

• Project Cars – Great balance of modern power and affordability

• Daily Driver Replacement – If you’ve got a blown engine or slipping transmission, this is a direct-fit replacement for many 99–07 GM 2WD trucks and SUVs

• Performance Builds – Add a cam, headers, tune, and you’ve got an easy 400+ HP setup

 Additional Services Chevrolet 5.3L 4L60 2WD transmission

Need help getting started with your swap or build? We can assist with:

• ECM programming (VATS removal, standalone swap tuning)

• Custom wiring harness modifications

• Swap advice and compatibility questions

• Engine stand or pallet shipping

Just let us know what your project is, and we’ll help tailor the package to your needs.

 Shipping & Pickup The Chevrolet 5.3L 4L60 2WD transmission

• Location: [33142]

• Local Pickup: Available and preferred for fastest turnaround

• Shipping: Freight shipping available across the continental U.S.

  • Engine and transmission shipped securely on a pallet

  • Residential delivery with liftgate available (additional fee)

  • Buyer responsible for shipping costs (contact for quote)

• Handling Time: Typically 1–3 business days after payment clears